Species guide

American sycamore

Latin name

Platanus occidentalis

Other Common names

Buttonwood, American planetree

Distribution

Throughout Eastern USA.

General Description

The sapwood of sycamore is white to light yellow, while the heartwood is light to dark brown. The wood has a fine close texture with interlocked grain. It is not related in any way to European sycamore but it has the same family classification, and similar characteristics to European plane. Contrasts well with other species.

Working Properties

The wood machines well, but high speed cutters are needed to prevent chipping. It is resistant to splitting due to the interlocked grain. The wood glues well and stains and polishes, with care, to an excellent finish. It dries fairly rapidly, with a tendency to warp. It has moderate shrinkage and little movement in performance.

Physical Properties

The wood is classified as moderate in weight, hardness, stiffness and shock resistance. It turns well on the lathe and has good bending qualities.

Durability

Rated as non-resistant to heartwood decay. The sapwood is liable to attack by the common furniture beetle, but is permeable to preservative treatment.

Availability

USA:
Reasonable availability in a range of specifications and grades in lumber and veneer.

Export:
Limited, due to sporadic demand.

Main Uses

Furniture, furniture parts (drawer sides), internal joinery, panelling and mouldings, flooring, kitchen ware, butchers blocks and veneered panels.

Grading

Tends to move when dry so it is recommended that grading be done after kiln drying.

Technical statistics

Specific Gravity (12% M.C.):	0.49
Average Weight (12% M.C.):	545 kg/m3
Average Volume Shrinkage (Green to 6% M.C.):	11.40%
Modulus of Elasticity:	9791 MPa
Hardness:	3425 N